Leaf_ Derived Type

  1. LeafClass.f90
  2. LeafClass
  3. Leaf_

type, public :: Leaf_


Contents

Variables

Type-Bound Procedures


Components

TypeVisibility AttributesNameInitial
type(FEMDomain_), public :: FEMDomain
real(kind=real64), public, allocatable:: LeafSurfaceNode2D(:,:)
real(kind=real64), public :: ShapeFactor
real(kind=real64), public :: Thickness
real(kind=real64), public :: length
real(kind=real64), public :: width
real(kind=real64), public :: center(3)
real(kind=real64), public :: MaxThickness
real(kind=real64), public :: Maxlength
real(kind=real64), public :: Maxwidth
real(kind=real64), public :: center_bottom(3)
real(kind=real64), public :: center_top(3)
real(kind=real64), public :: outer_normal_bottom(3)
real(kind=real64), public :: outer_normal_top(3)
real(kind=real64), public, allocatable:: source(:)
real(kind=real64), public, allocatable:: ppfd(:)
real(kind=real64), public, allocatable:: A(:)
integer(kind=int32), public :: Division
type(Leaf_), public, pointer:: pleaf
type(Peti_), public, pointer:: pPeti
real(kind=real64), public :: rot_x =0.0d0
real(kind=real64), public :: rot_y =0.0d0
real(kind=real64), public :: rot_z =0.0d0
real(kind=real64), public :: disp_x =0.0d0
real(kind=real64), public :: disp_y =0.0d0
real(kind=real64), public :: disp_z =0.0d0
real(kind=real64), public :: shaperatio =0.30d0
real(kind=real64), public :: minwidth
real(kind=real64), public :: minlength
real(kind=real64), public :: MinThickness
integer(kind=int32), public, allocatable:: I_planeNodeID(:)
integer(kind=int32), public, allocatable:: I_planeElementID(:)
integer(kind=int32), public, allocatable:: II_planeNodeID(:)
integer(kind=int32), public, allocatable:: II_planeElementID(:)
integer(kind=int32), public :: A_PointNodeID
integer(kind=int32), public :: B_PointNodeID
integer(kind=int32), public :: A_PointElementID
integer(kind=int32), public :: B_PointElementID
integer(kind=int32), public :: xnum =10
integer(kind=int32), public :: ynum =10
integer(kind=int32), public :: znum =10
real(kind=real64), public :: V_cmax =100.0d0
real(kind=real64), public :: V_omax =100.0d0
real(kind=real64), public :: O2 =380.0d0
real(kind=real64), public :: CO2 =202000.0d0
real(kind=real64), public :: R_d =1.0d0
real(kind=real64), public :: K_c =272.380d0
real(kind=real64), public :: K_o =165820.0d0
real(kind=real64), public :: J_ =0.0d0
real(kind=real64), public :: I_ =0.0d0
real(kind=real64), public :: phi =0.0d0
real(kind=real64), public :: J_max =180.0d0
real(kind=real64), public :: theta_r =0.0d0
real(kind=real64), public :: maxPPFD =1.0d0
real(kind=real64), public :: Lambda =37.430d0
real(kind=real64), public :: temp =303.0d0
real(kind=real64), public, allocatable:: DryDensity(:)
real(kind=real64), public, allocatable:: WaterContent(:)

Type-Bound Procedures

procedure, public :: Init => initLeaf

  • public subroutine initLeaf(obj, config, regacy, Thickness, length, width, ShapeFactor, MaxThickness, Maxlength, Maxwidth, rotx, roty, rotz, location, species, SoyWidthRatio, curvature)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=*), intent(in), optional :: config
    logical, intent(in), optional :: regacy
    real(kind=real64), intent(in), optional :: Thickness
    real(kind=real64), intent(in), optional :: length
    real(kind=real64), intent(in), optional :: width
    real(kind=real64), intent(in), optional :: ShapeFactor
    real(kind=real64), intent(in), optional :: MaxThickness
    real(kind=real64), intent(in), optional :: Maxlength
    real(kind=real64), intent(in), optional :: Maxwidth
    real(kind=real64), intent(in), optional :: rotx
    real(kind=real64), intent(in), optional :: roty
    real(kind=real64), intent(in), optional :: rotz
    real(kind=real64), intent(in), optional :: location(3)
    integer(kind=int32), intent(in), optional :: species
    real(kind=real64), intent(in), optional :: SoyWidthRatio
    real(kind=real64), intent(in), optional :: curvature

procedure, public :: rotate => rotateleaf

  • public recursive subroutine rotateleaf(obj, x, y, z, reset)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    real(kind=real64), intent(in), optional :: x
    real(kind=real64), intent(in), optional :: y
    real(kind=real64), intent(in), optional :: z
    logical, intent(in), optional :: reset

procedure, public :: move => moveleaf

  • public recursive subroutine moveleaf(obj, x, y, z, reset)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    real(kind=real64), intent(in), optional :: x
    real(kind=real64), intent(in), optional :: y
    real(kind=real64), intent(in), optional :: z
    logical, intent(in), optional :: reset

procedure, public :: curve => curveleaf

  • public subroutine curveleaf(obj, curvature)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    real(kind=real64), intent(in) :: curvature

procedure, public :: create => createLeaf

  • public subroutine createLeaf(obj, SurfacePoints, filename, x_num, y_num, x_len, y_len)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    real(kind=real64), intent(in), optional :: SurfacePoints(:,:)
    character(len=*), intent(in), optional :: filename
    integer(kind=int32), intent(in), optional :: x_num
    integer(kind=int32), intent(in), optional :: y_num
    real(kind=real64), intent(in), optional :: x_len
    real(kind=real64), intent(in), optional :: y_len

procedure, public, pass :: connectLeafLeaf => connectleafleaf

  • public subroutine connectleafleaf(obj, direct, leaf)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=2), intent(in) :: direct
    class(Leaf_), intent(inout) :: leaf

procedure, public, pass :: connectLeafStem

  • public subroutine connectLeafStem(obj, direct, stem)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=2), intent(in) :: direct
    class(Stem_), intent(inout) :: stem

generic, public :: connect => connectLeafLeaf, connectLeafStem

  • public subroutine connectleafleaf(obj, direct, leaf)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=2), intent(in) :: direct
    class(Leaf_), intent(inout) :: leaf

  • public subroutine connectLeafStem(obj, direct, stem)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=2), intent(in) :: direct
    class(Stem_), intent(inout) :: stem

procedure, public :: photosynthesis => photosynthesisLeaf

  • public subroutine photosynthesisLeaf(obj, dt, air)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    real(kind=real64), intent(in) :: dt
    type(Air_), intent(in) :: air

procedure, public :: rescale => rescaleleaf

  • public subroutine rescaleleaf(obj, x, y, z)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout), optional :: obj
    real(kind=real64), intent(in), optional :: x
    real(kind=real64), intent(in), optional :: y
    real(kind=real64), intent(in), optional :: z

procedure, public :: adjust => adjustLeaf

  • public subroutine adjustLeaf(obj, width)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    real(kind=real64), intent(in) :: width(:,:)

procedure, public :: resize => resizeleaf

  • public subroutine resizeleaf(obj, x, y, z)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout), optional :: obj
    real(kind=real64), intent(in), optional :: x
    real(kind=real64), intent(in), optional :: y
    real(kind=real64), intent(in), optional :: z

procedure, public :: getVolume => getVolumeLeaf

  • public function getVolumeLeaf(obj) result(ret)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(in) :: obj

    Return Value real(kind=real64)

procedure, public :: getBiomass => getBiomassLeaf

  • public function getBiomassLeaf(obj) result(ret)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(in) :: obj

    Return Value real(kind=real64)

procedure, public :: getCoordinate => getCoordinateleaf

  • public function getCoordinateleaf(obj, nodetype) result(ret)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=*), intent(in) :: nodetype

    Return Value real(kind=real64), allocatable, (:)

procedure, public :: gmsh => gmshleaf

  • public subroutine gmshleaf(obj, name)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=*), intent(in) :: name

procedure, public :: msh => mshleaf

  • public subroutine mshleaf(obj, name)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=*), intent(in) :: name

procedure, public :: vtk => vtkleaf

  • public subroutine vtkleaf(obj, name)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=*), intent(in) :: name

procedure, public :: stl => stlleaf

  • public subroutine stlleaf(obj, name)

    Arguments

    Type IntentOptional AttributesName
    class(Leaf_), intent(inout) :: obj
    character(len=*), intent(in) :: name